430act Styrene Monomer Gelcoat Unsaturated Polyester Resin for Anti-Seepage Layer, Temperature Resistant Mold of Watercraft

• Customization: Available
• Molecular Principal Chain: Carbon Chain Polymer
• Authentication 1: CCS
• Model NO.: 430 ACT
• Authentication 2: Lr
• Authentication 3: ISO
• Flash Point: 33°c
• Tensile Strength: 86MPa
• Tensile Modulus: 3, 2gpa
• Bending Strength: 150MPa
• Flexural Modulus: 3, 3gpa
• Transport Package: Tray
• Specification: Styrene solution
• Trademark: Evergreen
• Origin: Jiangsu, China
• HS Code: 3905910000
• Production Capacity: 100 Tons/Month

Product Description

Atlac ® 430 ACT unsaturated polyester resin

Product Description

430 ACT Product description
1.Standard oxirene ester resin for hand lay up spray process.
2.It has excellent impermeability and long-term heat resistance, suitable for the production of anti-seepage layers and temperature resistant molds for ships and boats.
430 ACT Characteristic performance
1.Excellent chemical corrosion resistance and water resistance
2.Excellent mechanical performance
3.Heat resistance
4.High dynamic load bearing capacity
5.CCS/LR certification
430 ACT Product attributes
Atlac ® 430 ACT is a styrene solution of pre promoted thixotropic epoxy bisphenol A vinyl resin with moderate reactivity and viscosity.

430 ACT Typical Applications
Atlac ® 430 ACT can be used for glass fiber reinforced components with excellent chemical corrosion resistance to achieve better mechanical properties, such as storage tanks, containers and devices, corrosion protection, hydraulic engineering, repair of sewage pipelines, anti-corrosion flooring, mold manufacturing, etc. Using Atlac ® The laminated board manufactured with 430 ACT has excellent long-term heat resistance and high dynamic load bearing capacity. Atlac ® 430 ACT has obtained CCS certification from China Classification Society and LR certification from Lloyd's Register of Shipping.

430 ACT Storage Guidelines
This resin is suitable for storage in a dark and dry place with a temperature between 5 ºC and 30 ºC. The storage period may be shortened at higher temperatures and may lead to changes in resin properties. The storage life of vinyl ester resins containing styrene will be sharply shortened if exposed to light. Therefore, it is only suitable for storage in a dark place and 100% light proof container. Direct sunlight should be avoided.

430 ACT ISO 9001:2015 certification
The quality management system of each AOC manufacturing factory has been certified to the ISO 9001:2015 standard. This certification confirms that each AOC equipment follows the same internationally recognized management and quality assurance model. We operate in this mode to add value to the resins produced by our customers.

430 ACT Process Operation Guidelines
A. Recommend using MEKP curing system with a dosage of 1%~2.5%; Depending on the construction temperature
Adjust the amount of curing agent. If the process requires a longer gel time (>60min), tert butyl catechol inhibitor can be added in the MEKP system. The workshop temperature should be maintained between 18 ºC and 32 ºC, and the workshop humidity should be maintained between 40% and 90%. Constant workshop conditions will obtain constant gel time and help manufacturers produce high-quality products.
B. During the curing process, it is recommended to add 0.2% wax with a melting point of 54-57 ° C to the surface of the product. When added, a 10% styrene solution is prepared. The final product with good curing will not stick to the surface.
C. Thixotropic resin, it is recommended to perform appropriate barrel rolling and gentle stirring before use to make the product uniform and conducive to operation.
430 ACT Application Operation Guide
Room temperature cured products also need to undergo post curing treatment to achieve optimal physical and chemical properties. Prior to this, the product needs to undergo 24 hours of room temperature curing. The post curing conditions are: 80-100oC/3-6 hours (thick products take longer); For components used for chemical corrosion resistance, post curing is particularly important.

Product Parameters

430 ACT Typical performance of liquid resin
Performance	numerical value	Unit	test method
flash point	33	°C	TM 2800
Storage period, no polymerization inhibitor, protected from light, 25 ° C	3	month	-
430 ACT Typical performance of pure resin casting body
tensile strength	86	MPa	ISO 527-2
Tensile modulus	3,2	GPa	ISO 527-2
Tensile fracture elongation	5,1	%	ISO 527-2
bending strength	150	MPa	ISO 178
Flexural modulus	3,3	GPa	ISO 178
Hot deformation temperature HDT	117	°C	ISO 75 Ae
Glass transition temperature Tg	140	°C	ASTM D570
Notched impact strength	20	kJ/m2	ISO 179
Note: The curing system is to add 2.0 g of curing agent Butanox M50 to 100 g of resin. Curing at room temperature for 24 hours, curing at 100 ºC for 3 hours.
430 ACT Index
appearance	muddy	-	TM 2265
Solid content, infrared drying	48-53	%	TM 2033
Acid value	3--8	mgKOH	/g
TM 2401	Viscosity@23ºC	400-500 mPa.s	TM 2013
Gel time (25ºC-35°C)	35-55	minute	TM 2625
Note: Reactivity test: Add 2.0g of curing agent Butanox separately ® Add 100 g of resin.

Application

 

Our Advantages

Why Choose Us?

1.Provide Full Export Certificates Necessary For Export In Short Time, Delivery Time Fast .

2.No District Limit , Can Export Our Chemicals To Every Corner Of The World.

3.Corporate With World Famous Brand, Quality Assured, Cost Effective .

4.Professional And Strong Technical Support.

5.Full Line Nouryon Brand Peroxides

6.Hot Chemicals, Short Of Supply Chemicals, We Have .

7.Rich Export Experience In High Dangerous Goods , Like Chemicals Trigonox 301,Perkadox 16 Which Need Cool Container.

 

Production Process

Company Profile

Evergreen Chemicals is a leading manufacturer and supplier of chemical composite materials in China. We've been and kept leading roles in this industry for more than 20 years, serving 8000+ customers all over the world from more than 25 fields. Our company is located in Jiangyin, half an hour to Shanghai by train, enjoying convenient transportation access.

We are specialized in researching, producing and distributing resin materials and its auxiliaries with premium quality. Our main products are unsaturated polyester resin, epoxy resin, vinyl resin and organic peroxides. In addition to market our own products, we are also the distributor of some global brands like NUORYON, SWANCOR, AOC, INOES etc.  

Besides, auxiliaries like curing agent, accelerator, and initiator are also available here to customers. Our products are widely used in the fields of automobiles, tent poles, cooling towers, pipes, FRP, artificial stones, handicrafts, and resin manhole covers.

 

Certifications

FAQ