Atlac 580 Act High Grade Bisphenol Urethane Vinylester Resin for Chemical Resistant Equipment and Marine Applications

• Customization: Available
• Formula: Cnhnon
• Molecular Principal Chain: Carbon Chain Polymer
• Model NO.: Atlac 580 ACT
• Color: Yellow
• Density, 20 °c: 1320kg/M3
• Glass Fiber Content: 30%
• Tensile Strength: 105MPa
• Tensile E-Modulus: 7.4gpa
• Flexural Strength: 160MPa
• Flexural E -Modulus: 6.8gpa
• Transport Package: Wooden Box
• Trademark: Evergreen
• Origin: Jiangsu, China
• HS Code: 3905910000
• Production Capacity: 200000 Kilogram/Kilograms Per Week

Product Description

Atlac ® 580ACT
high grade Bisphenol A Urethane Vinylester, dissolved in styrene

Product Description

PRINCIPAL PROPERTIES
Atlac® 580 ACT has excellent wet out and de-aerating   
properties for easy processing. Compared to conventional
Vinylester resins foaming after MEK peroxide addition is highly reduced in Atlac® 580 ACT leading to less air inhibition inside
the laminate and on the surface.
Due to its urethane incorporation, Atlac® 580 ACT features
enhanced thixotropic behavior preventing rinse off inclined
mold surfaces and shows an improved compatibility with aramid fiber reinforcements.
Atlac® 580 ACT provides low exothermic reaction during cure allowing thick sections to be fabricated in one go,  however through cure in thin laminates is favored by excellent curing behavior.
Final products made with Atlac® 580 ACT show excellent
hydrolysis resistance and good thermal stability.Atlac® 580 ACT is resistant to many aqueous media,acidic salts, alkaline media and hot water.
The resin offers an outstanding combination of heat resistance and flexibility.

STORAGE GUIDELINES
The resin should be stored in a dark and dry place in original 
unopened and undamaged packaging at temperatures
between 5°C and 30°C.
Shelf life is reduced at higher temperatures and the properties of the resin might change during storage.The shelf life of styrene containing Vinylester will be significantly reduced when exposed to light. Store in dark and in 100% light tight containers only. Exposure to direct sunlight should be avoided.

MATERIAL SAFETY
A Material Safety Data Sheet of this product is available on request.

TEST METHODS
Test methods (TM) referred to in the table(s) are available on request.

GUIDELINES BEFORE USE
Before use, the resin should be conditioned at a well
defined application dependent temperature (usually
15°C minimum for a MEKP / Co cure).Stir the resin well before use.

APPROVALS
Cured non-reinforced Atlac® 580 ACT conforms to type 1310 according to DIN 16946/2.
According to EN13121/1 Atlac® 580 ACT is classified group 7B.
The resin is certified by Lloyd's Register and Registro 
Navale Italiano (R.I.Na.)as laminating resin for use in Marine
applications.

MAJOR APPLICATIONS
Atlac® 580 ACT is specially developed to meet the
requirements of hand lay-up and spray-up applications.  The resin is recommended for the fabrication of chemical resistant equipment and marine applications.

 

 

Product Parameters

PRODUCT SPECIFICATIONS UPON DELIVERY
Property	Range	Unit	TM
Water content	0 - 1000	ppm	2350
Acid value as such	4.0 - 8.0	mg KOH/g	2401
Solids content, IR	49.5 - 52.5	%	2033
Viscosity, 2 s-1	1000- 1600	mPa.s	2313
Viscosity, 20 s-1	500 - 600	mPa.s	2313
Viscosity, 250 s-1	370 - 430	mPa.s	2313
Time from 25 °C - 35 °C	25.5 - 31.5	Minute	2625
Time from 25 °C - Peak	42.5 - 52.5	Minute	2625
Peak temperature	125 - 155	°C	2625
REMARKS	Viscosity measurement:	Z2/23°C
	Reactivity measurement:	1.5 g Butanox M 50 added to 100 g of resin
PROPERTIES OF THE LIQUID RESIN (TYPICAL VALUES)
Property	Value	Unit	TM
Flash point	33	°C	2800
Stability, no init., dark, 25°C	3	Month	-
PROPERTIES OF CAST UNFILLED RESIN (TYPICAL VALUES)
Property	Value	Unit	TM
Density, 20 °C	1110	kg/m3	-
Tensile strength	83	MPa	ISO 527-2
Tensile E-modulus	3.5	GPa	ISO 527-2
Elongation at break	4.2	%	ISO 527-2
Flexural strength	153	MPa	ISO 178
Flexural E -Modulus	3.55	GPa	ISO 178
Heat deflection temp. (HDT)	115	°C	ISO 75-A
Glass transition temperature (Tg)	132	°C	DIN 53445
Modulus of elasticity in bending	1.7	GPa	DIN 53445
Impact strength- unnotched spec.	15	kJ/m2	ISO 179
Water absorption, 25 °C	0.16	%	ISO R 62
Water absorption, 100 °C	0.22	%	ISO R 117
Barcol hardness	40	Barcol	2604
CURING CONDITIONS	Cured with 1.5 g Butanox M-50 added to 100 g of resin.
	After 24 h at RT followed by post curing for 3 h at 100 °C.

PROPERTIES OF CAST REINFORCED RESIN (TYPICAL VALUES)
Property	Value	Unit	TM
Density, 20 °C	1320	kg/m3	-
Glass fiber content	30	%	-
Tensile strength	105	MPa	ISO 527-2
Tensile E-modulus	7.4	GPa	ISO 527-2
Flexural strength	160	MPa	ISO 178
Flexural E -Modulus	6.8	GPa	ISO 178
Compressive strength	175	MPa	ASTM D695
Modulus of elasticity in bending	3.07	GPa	DIN 53445
Impact resist. - unnotched spec.	115	kJ/m2	ASTM D256
Linear expansion	30 x 10-6	K-1	ASTM D696
Thermal conductivity	0.21	W/m.K	DIN 52612
POT LIFE AND DEVELOPMENT OF BARCOL HARDNESS(TYPICAL VALUES)
Laminates with 3 layers of glass fiber mat (450 g/m2) cured at 23 °C
Pot life	1.5 weight %	2.0 weight %	Unit
	MEK- Peroxide	MEK-Peroxide
Resin	28	24	Minute
Laminate	42	37	Minute
Cure time in h	1.5 weight %	2.0 weight %	Unit
	MEK- Peroxide	MEK- Peroxide
1.5	0	0	Barcol
2	10	10	Barcol
2.5	20	20	Barcol
3	30	30	Barcol
24	40	40	Barcol
48	40	40	Barcol

Application

 

Our Advantages

Why Choose Us?

1.Provide Full Export Certificates Necessary For Export In Short Time, Delivery Time Fast .

2.No District Limit , Can Export Our Chemicals To Every Corner Of The World.

3.Corporate With World Famous Brand, Quality Assured, Cost Effective .

4.Professional And Strong Technical Support.

5.Full Line Nouryon Brand Peroxides

6.Hot Chemicals, Short Of Supply Chemicals, We Have .

7.Rich Export Experience In High Dangerous Goods , Like Chemicals Trigonox 301,Perkadox 16 Which Need Cool Container.

 

Production Process

 

 

Company Profile

Evergreen Chemicals is a leading manufacturer and supplier of chemical composite materials in China. We've been and kept leading roles in this industry for more than 20 years, serving 8000+ customers all over the world from more than 25 fields. Our company is located in Jiangyin, half an hour to Shanghai by train, enjoying convenient transportation access.

We are specialized in researching, producing and distributing resin materials and its auxiliaries with premium quality. Our main products are unsaturated polyester resin, epoxy resin, vinyl resin and organic peroxides. In addition to market our own products, we are also the distributor of some global brands like NUORYON, SWANCOR, AOC, INOES etc.  

Besides, auxiliaries like curing agent, accelerator, and initiator are also available here to customers. Our products are widely used in the fields of automobiles, tent poles, cooling towers, pipes, FRP, artificial stones, handicrafts, and resin manhole covers.

Certifications

FAQ