Nouryon Trigonox 301 Efficient Peroxide Formulation for Production of Controlled Rheology Polypropylene (CR-PP)

• Customization: Available
• CAS No.: 24748-23-0
• Formula: C12h24o6
• Model NO.: TRIGONOX 301
• EINECS: 429-320-2
• Type: Carbon Black
• Appearance: 50 PT-Co/Apha Max
• Quality: Industrial
• Active Oxygen Content Peroxide: 18.16%
• Active Oxygen: 7.3-7.6 %
• Appearance, 20-25 °c: Clear to Slightly Hazy Liquid
• Density, 20 °c: 0.875 G/Cm³
• Viscosity, 20 °c: 5 MPa.S
• Purity: 100%
• Trademark: Evergreen
• Origin: Jiangsu, China
• HS Code: 2909609000
• Production Capacity: 10000 Kilogram/Kilograms Per Month

Product Description

Trigonox 301
3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane

Product Description

 

Trigonox® 301 is an efficient peroxide formulation for
the production of controlled rheology polypropylene
(CR-PP) in an extrusion process.

TRIGONOX 301 Storage
Due to the relatively unstable nature of organic peroxides a loss of quality can be detected over a period of time. To
minimize the loss of quality, Nouryon recommends a maximum storage temperature (Ts max. ) for each organic peroxide product.

Ts Max.                           :40°C (104°F)
Ts min.                            :10°C (50°F)
TRIGONOX 301 Note:
When stored under these recommended storage conditions, Trigonox® 301 will remain within the Nouryon specifications for a period of at least 12 months after delivery.

 

TRIGONOX 301 Thermal stability
Organic peroxides are thermally unstable substances, which may undergo self-accelerating decomposition. The lowest
temperature at which self-accelerating decomposition of a substance in the original packaging may occur is the Self-Accelerating Decomposition Temperature (SADT). The SADT is determined on the basis of the Heat Accumulation Storage Test.

SADT:                                     110°C (230°F)
TRIGONOX 301 Method:
The Heat Accumulation Storage Test is a recognized test method for the determination of the SADT of organic peroxides (see Recommendations on the Transport of Dangerous Goods, Manual of Tests and Criteria - United Nations, New York and Geneva).

 

TRIGONOX 301 Safety and handling
Keep away from open fire, sparks and other sources of heat or ignition. Avoid contact with reducing agents (e.g. amines),
acids, alkalis and heavy metal compounds (e.g. accelerators, driers and metal soaps). PLEASE Store Trigonox® 301 ABOVE 10°C! Please refer to the Safety Data Sheet (SDS) for further information on the safe storage, use and handling of Trigonox® 301. This information should be thoroughly reviewed prior to acceptance of this product.



TRIGONOX 301 Major decomposition products
Carbon dioxide, Ethane, Methane, Ethyl acetate, Methyl ethyl ketone, Methyl acetate

 

TRIGONOX 301 Packaging and transport

The standard packaging is a 30-liter Nourytainer® for 25 kg peroxide formulation. Both packaging and transport meet the
international regulations. For the availability of other packed quantities consult your Nouryon representative. Trigonox®
301 is classified as Organic peroxide type D; liquid, Division 5.2; UN 3105.

 

  

Product Parameters

 

Chemical name & Type	CAS number &short name	Model	Application
Methyl ethyI ketone peroxide	1338-23-4  MEKP	Butanox HBO-50	Fast-gelling MEKP, particularly suitable for the curing of laminating resins and lacquers.
		Butanox LPT-IN	General purpose MEKP for extra long geltimes in standard orthophthalic resins, and the product choice for curing vinylester resins
		Butanox M-50	High reactive, general purpose MEKP with low water content
		Butanox M-50A	Phthalate-free, medium-reactive, general purpose MEKP with low water content for curing unsaturated polyester resins at room temperature
		Butanox M-60	Medium-reactive, general purpose MEKP with low water content, 10% higher active oxygen compared to Butanox® M-50
		Trigonox Super 828	Middle reaction activity, low H2O2 content
		Trigonox V328	Middle reaction activity, low H2O2 content, low,
		Trigonox V388	Middle reaction activity, low H2O2 content, low,
Tert-Butyl peroxy-2-ethylhexanoate	3006-82-4 TBPO	Trigonox 21S	Initiator for (co)polymerization of ethylene, styrene, acrylonitrile and (meth)acrylates. Curing agent for unsaturated polyester resins
Tert-Butyl Peroxy Benzoate	614-45-9    TBPB	Trigonox 93	Developed for the cure of unsaturated polyester resins in the temperature range of 60°C and higher, faster cure
		TRIGONOX C	Medium and high temperature catalyst
Tert-Butyl peroxy-3,5,5-trimethylhexanoate	13122-18-4	Trigonox 42PR	Developed for the cure of unsaturated polyester resins in combination with Accelerator NL-51PN (6% cobalt solution) in the temperature range of 60°C and higher
Methyl ethyl ketone peroxide and cumyl hydroperoxide	MEKP+CHP  1338-23-4, 80-15-9	Trigonox 249	Specially developed for curing unsaturated polyester and vinyl ester resins at ambient conditions ,include cast polymer and laminates
Benzoyl peroxide	BPO 94-36-0	PERKADOX GB-50L	Free-flowing 50% peroxide formulation on a phthalate-free carrier for curing unsaturated polyester resins and (meth)acrylic resins at ambient and elevated temperatures. Provides excellent solubility in standard thermoset curing applications.
		Perkadox L-W75	Initiator for (co)polymerization of styrene, acrylonitrile, vinylacetate, (meth)acrylates. Curing agent for unsaturated polyester resins
		PERKADOX BTW50	50% phthalate free dibenzoyl peroxide paste for curing unsaturated polyester resins at ambient and elevated temperatures
		Perkadox GB-50X	Free-flowing 50% peroxide formulation on a phthalate-free carrier for curing unsaturated polyester resins and (meth)acrylic resins at ambient and elevated temperatures. Provides excellent solubility in standard thermoset curing applications
Tert-butylperoxy isopropyl carbonate	TBIC 2372-21-6	TRIGONOX BPIC-C75	Initiator: used for the polymerization of ethylene, styrene, acrylonitrile, acrylate and methacrylate.
Di-tert-butyl peroxide	DTBP      110-05-4	TRIGONOX B	Crosslinking agent, vulcanizing agent DTBP
Cumyl hydroperoxide	CHP 80-15-9	TRIGONOX K-80	Polymerization initiator for (co)polymerization of styrene, butadiene, acrylonitrile and (meth)acrylates and a curing agent for vinylester resins
		TRIGONOX K-90	Initiator for (co)polymerization of styrene, butadiene, acrylonitrile and (meth)acrylates. Curing agent for vinyl ester resins
Methyl isobutyl ketone peroxide	MIBK  37206-20-5	TRIGONOX HMA	Filament winding and production of flat and corrugated boards
Tert-Butyl hydroperoxide	TBHP        75-91-2	TRIGONOX A-W70	Styrene, acrylonitrile, vinyl chloride, methacrylate polymerization
Dilauroyl peroxide	LPO        105-74-8	Laurox	Widely used initiator ,used in suspension and mass polymerization of vinyI chloride between 60°C and 80°C.
1,1-Ditert-butylperoxy)-3,3,5- trimethylcyclohexane	CH335 6731-36-8	TRIGONOX 29C90	SMC&BMC process to extend storage time
2,4-DICHLOROBENZOYL PEROXIDE	DCBP      133-14-2	Perkadox OPC-50S-PS-MM	DCBP Rubber crosslinking agent
2,5-Bis(tert-butyl peroxide)-2,5-dimethyhexane	78-63-7	TRIGONOX 101	An effective peroxide for the production of controlled rheological polypropylene (CR-PP). It allows polypropylene producers to have great flexibility in controlling the melt flow index (MFI) of the polymer.
Dicumyl peroxide	DCP          80-43-3	Perkadox BC-FF	Used for rubber (natural rubber, synthetic rubber), polyolefin crosslinking
3,6,9-Triethyl-3,6,9-trimethyl-1,4,7-triperoxonane	24748-23-0	TRIGONOX 301	Peroxide formulation for the production of CR-PP and LDPE. Initiator for (co)polymerization of (meth)acrylates
2,5-Dimethyl-2,5-di(tert-butylperoxy) hexyne-3	1068-27-5	TRIGONOX 145-E85	Bifunctional peroxide which is used for the crosslinking of natural rubber and synthetic rubbers, as well as polyolefins
Electroconductive carbon black	1333-86-4	KETJENBLACK EC 300-J	For anti -electricity and conductive applications
		Ketjenblack EC-600JD	used for for anti -electricity and conductive applications
Mixture of acetylacetone peroxide and tert-butyl peroxybenzoate in solvents	614-45-9, 37187-22-7	TRIGONOX 279	Continuous laminating, resin transfer moulding, filament winding and centrifugal casting.

Application

Trigonox® 301 is an initiator for (co)polymerization of (meth)acrylates. Trigonox® 301 can be used for the market segments: polymer production and acrylics production with their different applications/functions.

 

Our Advantages

Why Choose Us?

1.Provide Full Export Certificates Necessary For Export In Short Time, Delivery Time Fast .

2.No District Limit , Can Export Our Chemicals To Every Corner Of The World.

3.Corporate With World Famous Brand, Quality Assured, Cost Effective .

4.Professional And Strong Technical Support.

5.Full Line Nouryon Brand Peroxides

6.Hot Chemicals, Short Of Supply Chemicals, We Have .

7.Rich Export Experience In High Dangerous Goods , Like Chemicals Trigonox 301,Perkadox 16 Which Need Cool Container.

Production Process

Company Profile

Evergreen Chemicals Co., Ltd. is located in Wuxi on the shore of the Taihu Lake. it was established in 2019. After nearly five years of development and continuous innovation,we have became your one-stop shop for composite materials including unsaturated polyester resin, vinyl ester resin, epoxy resin, organic peroxide, glass fiber cloth, and related accessories. We stick to the business policy of "creating a brand with high quality, expanding the market with service, seeking development with innovation, and winning the reputation with integrity". We actively carry out domestic and foreign businesses, which are highly recognized by lots of clients. At the same time, we have a large number of high-tech R&D talents from famous college, a complete and scientific supply chain management and quality management system, high-end and advanced hardware equipment, which keeps us improving in the development process and making us occupy a leading position in the industry. The company insists the business philosophy of "customer first, forge ahead" to provide customers with the best quality services.
We also welcome O E M and O D M orders. you can talk to our customer service center about your sourcing requirements, We will provide you with the most professional service. Welcome final users and distributors from all the world contact with us and create success.

Certifications

FAQ

1. Q: Is your company a manufacturer?
     A: Yes,we are. At the same time, we are also agents of other product brands.

2. Q:  Does your company provide samples?
     A:  Yes,we  can provide 100g and 200g for additive and 500g/1kg for resin as free samples,  but freight usually requires the buyer to bear.

3. Q:What is your company's  transportation form?
     A: Samples generally deliver by international express, a large number of goods can be transported by land or water.

4: Q: What is the quality and price of your product?
     A: Specializing in epoxy resin and other unsaturated polyester resin .100% tested and working before shipment .best price will grant you as per your quantity .

5. Q: How many days the clear phenolic epoxy resin could sotre ?
    A: 12 months below 25ºC in dark.