Trigonox Bpic-C75 Used for Polymer Production, Thermoset Composites and Acrylics Production

Product Details
Customization: Available
CAS No.: 2372-21-6
Formula: 176.2
Still deciding? Get samples of US$ 100/Piece
Request Sample

360° Virtual Tour

Gold Member Since 2023

Suppliers with verified business licenses

Audited Supplier

Audited by an independent third-party inspection agency

to see all verified strength labels (13)
  • Trigonox Bpic-C75 Used for Polymer Production, Thermoset Composites and Acrylics Production
  • Trigonox Bpic-C75 Used for Polymer Production, Thermoset Composites and Acrylics Production
  • Trigonox Bpic-C75 Used for Polymer Production, Thermoset Composites and Acrylics Production
  • Trigonox Bpic-C75 Used for Polymer Production, Thermoset Composites and Acrylics Production
  • Trigonox Bpic-C75 Used for Polymer Production, Thermoset Composites and Acrylics Production
Find Similar Products
  • Overview
  • Product Description
  • Product Parameters
  • Application
  • Production Process
  • Storage
  • Company Profile
  • Certifications
  • FAQ
Overview

Basic Info.

Model NO.
Trigonox BPIC-C75
EINECS
219-143-7
Type
Synthesis Material Intermediates
Appearance
Clear Liquid
Quality
Industrial
Colour
≤ 10 PT-Co / Apha
Active Oxygen
6.72-6.90 %
Assay
74.0-76.0 %
Hydroperoxides as Tbhp
≤ 0.10 %
Inorganic + Organic Hydrolysable Chlorid
≤ 150 Mg/Kg
Viscosity, 20°c
2.3 MPa.S
Density, 20 °c
0.900 G/Cm³
Viscosity, 20 °c
2.3 MPa.S
Ts Max.
25°c (77°f)
Transport Package
Customized
Trademark
Evergreen
Origin
Jiangsu, China
HS Code
2916399090
Production Capacity
10000 Kilogram/Kilograms Per Month

Product Description

Trigonox BPIC-C75
tert-Butylperoxy isopropyl carbonate, 75% solution in odorless mineral sprits
Trigonox Bpic-C75 Used for Polymer Production, Thermoset Composites and Acrylics Production
Product Description
Trigonox Bpic-C75 Used for Polymer Production, Thermoset Composites and Acrylics Production
Storage
Due to the relatively unstable nature of organic peroxides a loss of quality can be detected over a period of time. To minimize the loss of quality, Nouryon recommends a maximum storage temperature (Ts max. ) for each organic peroxide product.
 

For Trigonox BPIC-C75 
Ts  max.:                  25°C (77°F) and
Ts  min.:    -20°C (-4°F) to prevent crystallization
Note:

When stored according to these recommended storage conditions, Trigonox®BPIC-CP75 will remain within the Nouryon specifications for a period of at least 3months after delivery.
Thermal stability

Organic peroxides are thermally unstable substances, which may undergo self-accelerating decomposition. The lowest temperature at which self-accelerating 
decomposition of a substance in the original packaging may  occur is the Self-Accelerating Decomposition 
Temperature (SADT). The  SADT is determined on the 
basis of the Heat Accumulation Storage Test.


For TrigonoxBPIC-C75                
SADT : 70°C (158°F)

Method:

The Heat Accumulation Storage Test is a recognized test method for the determination of the SADT of organic peroxides(see Recommendations on the Transport of  Dangerous Goods,    Manual of Tests and Criteria - United Nations, New York and Geneva).
Trigonox Bpic-C75 Used for Polymer Production, Thermoset Composites and Acrylics Production
Product Parameters
Product description CAS number 2372-21-6
EINECS/ELINCS No. 219-143-7
TSCA status listed on inventory
Molecular weight 176.2
Active oxygen content peroxide 9.08%
Specifications Active oxygen 6.72-6.90 %
Appearance Clear liquid
Assay 74.0-76.0 %
Color ≤ 10 Pt-Co / APHA
Hydroperoxides as TBHP ≤ 0.10 %
Viscosity, 20°C 2.3 mPa.s
Inorganic + organic hydrolysable chloride ≤ 150 mg/kg
Characteristics Density, 20°C 0.900 g/cm³
Viscosity, 20°C 2.3 mPa.s
Half-life data 0.1 hr at 137°C (279°F)
1 hr at 117°C (243°C)
10 hr at 98°C (208°F)
Formula 1 kd = A·e-Ea/RT
Formula 2 t½ = (ln2)/kd
Ea 150.15 kJ/mole
A 2.49E+16 s-1
R 8.3142 J/mole·K
T (273.15+°C) K
Trigonox Bpic-C75 Used for Polymer Production, Thermoset Composites and Acrylics Production
 
Application
Trigonox® BPIC-C75 can be used for the market segments: polymer production, thermoset composites and acrylics production with their different applications/functions. For more information please check our website and/or contact us.
Trigonox Bpic-C75 Used for Polymer Production, Thermoset Composites and Acrylics Production
Trigonox Bpic-C75 Used for Polymer Production, Thermoset Composites and Acrylics Production

 
Production Process

Trigonox Bpic-C75 Used for Polymer Production, Thermoset Composites and Acrylics Production

Storage


Packaging and transport

The standard packaging is 10 kg of peroxide solution in 13
l HDPE drums.

Both packaging and transport meet the 
international
regulations.

For the availability of other packed quantities consult your Nouryon representative.

Trigonox® 
BPIC-C75 is classified as Organic 
peroxidetype C; liquid, Division 5. 2; UN 3103.
Trigonox Bpic-C75 Used for Polymer Production, Thermoset Composites and Acrylics Production
Trigonox Bpic-C75 Used for Polymer Production, Thermoset Composites and Acrylics Production
Safety and handling
Keep containers tightly closed. Store and handle TrigonoxBPIC-C75  in a dry 
well- ventilated place away from sources of heat or ignition and direct sunlight. Never weigh out in the storage room.

Avoid contact with reducing agents (e.g. amines), acids, alkalis and heavymetal compounds (e.g. accelerators, driers and metal soaps).
Please refer to the Material Safety Data Sheet (MSDS) for further information on the safe storage, use and
handling of Trigonox
BPIC-C75. This information 
should be thoroughly reviewed prior to acceptance of this product.


Major decomposition products
Carbon dioxide, Methane, Acetone, tert-Butanol, Isopropanol
Company Profile

Evergreen Chemicals Co., Ltd. is located in Wuxi on the shore of the Taihu Lake. It was established in 2019. After nearly five years of development and continuous innovation, we have became your one-stop shop for composite materials including unsaturated polyester resin, vinyl ester resin, epoxy resin, organic peroxide, glass fiber cloth, and related accessories. We stick to the business policy of "creating a brand with high quality, expanding the market with service, seeking development with innovation, and winning the reputation with integrity". We actively carry out domestic and foreign businesses, which are highly recognized by lots of clients. At the same time, we have a large number of high-tech R&D talents from famous college, a complete and scientific supply chain management and quality management system, high-end and advanced hardware equipment, which keeps us improving in the development process and making us occupy a leading position in the industry. The company insists the business philosophy of "customer first, forge ahead" to provide customers with the best quality services.

We also welcome O E M and O D M orders. You can talk to our customer service center about your sourcing requirements, We will provide you with the most professional service. Welcome final users and distributors from all the world contact with us and create success.

Trigonox Bpic-C75 Used for Polymer Production, Thermoset Composites and Acrylics ProductionTrigonox Bpic-C75 Used for Polymer Production, Thermoset Composites and Acrylics ProductionWhy Choose Us?

1.Provide Full Export Certificates Necessary For Export In Short Time, Delivery Time Fast .

2.No District Limit , Can Export Our Chemicals To Every Corner Of The World.

3.Corporate With World Famous Brand, Quality Assured, Cost Effective .

4.Professional And Strong Technical Support.

5.Full Line Nouryon Brand Peroxides

6.Hot Chemicals, Short Of Supply Chemicals, We Have .

7.Rich Export Experience In High Dangerous Goods , Like Chemicals Trigonox 301,Perkadox 16 Which Need Cool Container.

Trigonox Bpic-C75 Used for Polymer Production, Thermoset Composites and Acrylics Production

 
Certifications

Trigonox Bpic-C75 Used for Polymer Production, Thermoset Composites and Acrylics Production

FAQ

1. Q: Is your company a manufacturer?
     A: Yes,we are. At the same time, we are also agents of other product brands.

2. Q:  Does your company provide samples?
     A:  Yes,we  can provide 100g and 200g for additive and 500g/1kg for resin as free samples,  but freight usually requires the buyer to bear.

3. Q:What is your company's  transportation form?
     A: Samples generally deliver by international express, a large number of goods can be transported by land or water.

4: Q: What is the quality and price of your product?
     A: Specializing in epoxy resin and other unsaturated polyester resin .100% tested and working before shipment .best price will grant you as per your quantity .

5. Q: How many days the clear phenolic epoxy resin could sotre ?
    A: 12 months below 25ºC in dark.

Send your message to this supplier

*From:
*To:
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now
Contact Supplier