Fiberglass Reinforced Plastic Mould Gel Coat FRP Mould Gelcoat Resin

• Customization: Available
• CAS No.: 123-45-5
• Formula: C8h4o3.C4h10o3.C4H2O3
• Model NO.: TC-31
• EINECS: 208-750-2
• Molecular Principal Chain: Carbon Chain Polymer
• Color: Light Yellow Transparent Thick Liquid
• Flexible Strength: 120
• Flexible Modulus: 3.2gpa
• Tensile Strength: 68MPa
• Tensile Modulus: 3.2gpa
• Elongation: 2.6%
• Lmpact Strength: 12kj/ M3
• Barcol Hardness: 43
• Transport Package: Wooden Box
• Specification: 20kg or 50kg pails
• Trademark: Evergreen
• Origin: Jiangsu, China
• HS Code: 3905910000
• Production Capacity: 200000 Kilogram/Kilograms Per Week

Product Description

TC 31 Gelcoat Resin

 

Product Description

 

Storage
After a period of time, there may be some quality loss in the product. To minimize quality loss, Evergreen Chemicals recommends the highest for each product Storage temperature (Ts max).

For TC-31 gel coat:  Maximum storage temperature=30 ° C
                                 Minimum storage temperature=-10 ° C

When stored under the recommended conditions, the TC-31 gel coat can remain within the product specification range of Evergreen Chemicals for at least 3 months after delivery.

 

Properties
Iso type polyester gelcoat. It gives good mechanical properties, application properties, waterproof, wather reliability. It is recommended for example for the manufactrue of cooling tower, boats and other outdoor FRP products. It is suitable for spraying or hand lay up.

Packaging and transportation
PACKAGE:20kg or 50kg pails
STORAGE:maximum of 3 months under 25C in shade 
TRANSPORTATION:according to the rule of dangerous good control and GB 190-90. 

 

Safety and operation
Keep the container tightly closed. Store and operate TC-31 gel coats in a dry and well ventilated area. Each brand of gel coat should be stored separately and away from heat sources or ignition source, avoid direct sunlight. It is prohibited to weigh and pack in the storage room.

Gel coat spraying should be carried out in isolated areas in the spraying room or workshop, with good ventilation, sufficient light, dust-free, and a temperature of 18-25 ºC in the workshopThe humidity should not exceed 70%.

For detailed information on the safe storage, use, and operation of TC-31 gel coat, please refer to the Safety Data Sheet (MSDS). Before accepting this product, please Carefully read the relevant safety information on MSDS.

The data in this product manual are accurate and reliable, but customers should still conduct inspection and testing before using this product to confirm that it can meet the client's application requirements. Preserve all rights related to intellectual property

 

Product Parameters

Specification		TC 31	TestStandard
Gelcoat	Viscosity 25ºC cp	1600-2600 / 3500-5500	GB7193.1-1987
	Gel Time25ºC min	45158	GB7193.6-1987
Base Resin	Flexible Strength MPa	120	GB/T2570-1995
	Flexible Modulus GPa	3.2	GB/T2570-1995
	Tensile Strength MPa	68	GB/T2568-1995
	Tensile Modulus GPa	3.2	GB/T2568-1995
	Elongation%	2.6	GB/T2568-1995
	lmpact Strength KJ/ m3	12	GB/T2571-1995
	Barcol Hardness	43	GB3854-83
	HDT ºC	81	GB1634-1979
Construction technology	cure-system	Cobalt type accelerator,MEKP
	Construction methods	1.Temperature of workshop,raw materials and mould should be above 15ºC and relative humidity below 70%; 2,Spraying or hand lay up.
Note		1,There are transparence, white and other varied color,referred to TLANMAColour Card. 2,Colour gelcoat is promoted.

 

Application

 

Our Advantages

Why Choose Us?

1.Provide Full Export Certificates Necessary For Export In Short Time, Delivery Time Fast .

2.No District Limit , Can Export Our Chemicals To Every Corner Of The World.

3.Corporate With World Famous Brand, Quality Assured, Cost Effective .

4.Professional And Strong Technical Support.

5.Full Line Nouryon Brand Peroxides

6.Hot Chemicals, Short Of Supply Chemicals, We Have .

7.Rich Export Experience In High Dangerous Goods , Like Chemicals Trigonox 301,Perkadox 16 Which Need Cool Container.
 

Production Process

Company Profile

Evergreen Chemicals is a leading manufacturer and supplier of chemical composite materials in China. We've been and kept leading roles in this industry for more than 20 years, serving 8000+ customers all over the world from more than 25 fields. Our company is located in Jiangyin, half an hour to Shanghai by train, enjoying convenient transportation access.

We are specialized in researching, producing and distributing resin materials and its auxiliaries with premium quality. Our main products are unsaturated polyester resin, epoxy resin, vinyl resin and organic peroxides. In addition to market our own products, we are also the distributor of some global brands like NUORYON, SWANCOR, AOC, INOES etc.  

Besides, auxiliaries like curing agent, accelerator, and initiator are also available here to customers. Our products are widely used in the fields of automobiles, tent poles, cooling towers, pipes, FRP, artificial stones, handicrafts, and resin manhole covers.

Certifications

 

FAQ

1. Q: Is your company a manufacturer?
     A: Yes,we are. At the same time, we are also agents of other product brands.

2. Q:  Does your company provide samples?
     A:  Yes,we  can provide 100g and 200g for additive and 500g/1kg for resin as free samples,  but freight usually requires the buyer to bear.

3. Q:What is your company's  transportation form?
     A: Samples generally deliver by international express, a large number of goods can be transported by land or water.

4: Q: What is the quality and price of your product?
     A: Specializing in epoxy resin and other unsaturated polyester resin .100% tested and working before shipment .best price will grant you as per your quantity .

5. Q: How many days the clear phenolic epoxy resin could sotre ?
    A: 12 months below 25ºC in dark.