Safe and Reliable Aropol M 105 Tb CS Unsaturated Polyester Resin

• CAS No.: Un-Available
• Formula: Un-Available
• EINECS: Un-Available
• Color: Red Purple Transparent Thick Liquid
• Transport Package: Wooden Box
• Specification: 240kg
• Model NO.: AROPOL M 105 TB CS
• Trademark: Evergreen
• Origin: Jiangsu, China
• HS Code: 3905910000
• Production Capacity: 200000 Kilogram/Kilograms Per Week

Product Description

Safe and Reliable Aropol M 105 Tb CS Unsaturated Polyester Resin

 
 

Product Parameters

Exposure Guidelines

ACGIH	time weighted average	20 ppm
ACGIH	Short term exposure limit	40 ppm
NIOSH	Recommended exposure limit (REL):	50 ppm
NIOSH	Recommended exposure limit (REL):	215 mg/m3
NIOSH	Short term exposure limit	100 ppm
NIOSH	Short term exposure limit	425 mg/m3
OSHA Z2	time weighted average	100 ppm
OSHA Z2	Ceiling Limit Value:	200 ppm
OSHA Z2	Maximum concentration:	600 ppm

 PHYSICAL AND CHEMICAL PROPERTIES

Physical state	liquid
Odour	pungent
Boiling point/boiling range	293 °F / 145 °C Calculated Phase Transition Liquid/Gas
Flash point	84.9 °F / 29.4 °C Seta closed cup
Evaporation rate	1 Ethyl Ether
Lower explosion limit/Upper explosion limit	0.5 %(V)  / 6.1 %(V)  Calculated Explosive Limit
Vapour pressure	8.532 hPa @ 77 °F / 25 °C Calculated Vapor Pressure
Relative vapor density	(>)1 AIR=1
Density	1.078 g/cm3  @ 77 °F / 25 °C
	9 lb/gal  @ 77.00 °F / 25.00 °C
Water solubility	insoluble
Viscosity, kinematic	> 20.5 mm2/s @ 40 °C

 

Product Description

 

Product Description

AROPOL M 105 TB is a thixotropic, pre-accelerated, ortophthalic based polyester resin, with a

moderate geltime.

When applying AROPOL M 105 TB resin, styrene emission is reduced by up to 50% compared to

standard resins. Emission is only 2-5% of polyester resin used compared to 5-10% of standard

polyester resin. Excellent glass fiber wet out properties and easiness of application is characteristic

for AROPOL M 105 TB.

 

 

Application and use

AROPOL M 105 TB resin is suitable for spray-up, hand lay-up and filament winding methods for

manufacturing numerous FRP products for the marine, building and construction and transportation

markets.

Certificates and approvals

AROPOL M 105 TB resin is approved by Lloyd's Register and complies with the requirements of ISO

12215-1 standard for construction of small crafts.

The manufacturing, quality control and distribution of products, by Ashland Performance Materials,

are complying with one or more of the following programs or standards: Responsible Care, ISO 9001,

ISO 14001 and OHSAS 18001.

 

Notice

All information presented herein is believed to be accurate and reliable, and is solely for the user's

consideration, investigation and verification. The information is not to be taken as an express or

implied representation or warranty for which Ashland assumes legal responsibility. Any warranties,

including warranties of merchantability, fitness for use or non-infringement of intellectual property

rights of third parties, are herewith expressly excluded.

Since the user's product formulations, specific use applications and conditions of use are beyond the

control of Ashland, Ashland makes no warranty or representation regarding the results which may be

obtained by the user. It shall be the sole responsibility of the user to determine the suitability of any of

the products mentioned for the user's specific application.

Ashland requests that the user reads, understands and complies with the information contained

herein and the current Material Safety Data Sheet.

 

Application

 

 

Our Advantages

Why Choose Us?

1.Provide Full Export Certificates Necessary For Export In Short Time, Delivery Time Fast .

2.No District Limit , Can Export Our Chemicals To Every Corner Of The World.

3.Corporate With World Famous Brand, Quality Assured, Cost Effective .

4.Professional And Strong Technical Support.

5.Full Line Nouryon Brand Peroxides

6.Hot Chemicals, Short Of Supply Chemicals, We Have .

7.Rich Export Experience In High Dangerous Goods , Like Chemicals Trigonox 301,Perkadox 16 Which Need Cool Container.
 

Production Process

Company Profile

Evergreen Chemicals is a leading manufacturer and supplier of chemical composite materials in China. We've been and kept leading roles in this industry for more than 20 years, serving 8000+ customers all over the world from more than 25 fields. Our company is located in Jiangyin, half an hour to Shanghai by train, enjoying convenient transportation access.

We are specialized in researching, producing and distributing resin materials and its auxiliaries with premium quality. Our main products are unsaturated polyester resin, epoxy resin, vinyl resin and organic peroxides. In addition to market our own products, we are also the distributor of some global brands like NUORYON, SWANCOR, AOC, INOES etc.  

Besides, auxiliaries like curing agent, accelerator, and initiator are also available here to customers. Our products are widely used in the fields of automobiles, tent poles, cooling towers, pipes, FRP, artificial stones, handicrafts, and resin manhole covers.

Certifications

 

FAQ

1. Q: Is your company a manufacturer?
     A: Yes,we are. At the same time, we are also agents of other product brands.

2. Q:  Does your company provide samples?
     A:  Yes,we  can provide 100g and 200g for additive and 500g/1kg for resin as free samples,  but freight usually requires the buyer to bear.

3. Q:What is your company's  transportation form?
     A: Samples generally deliver by international express, a large number of goods can be transported by land or water.

4: Q: What is the quality and price of your product?
     A: Specializing in epoxy resin and other unsaturated polyester resin .100% tested and working before shipment .best price will grant you as per your quantity .

5. Q: How many days the clear phenolic epoxy resin could sotre ?
    A: 12 months below 25ºC in dark.