Methyl Ethyl Ketone Peroxide in Diisononyl Phthalate Butanoxlpt-in for Shipbuilding

• Customization: Available
• Quality: Industrial
• Tsca Status: Listed on Inventory
• Model NO.: ButanoxLPT-IN
• Total Active Oxygen: 8.4-8.6%
• Density, 20°c: 1.0117 G/Cm
• Viscosity, 20°c: 32.4 MPa.S
• Butanox Lpt-in: Ts Max. = 25°c
• Sadt: 60°c
• Transport Package: International Regulations
• Specification: Methyl ethyl ketone peroxide in diisononyl phthala
• Trademark: Evergreen
• Origin: Jiangsu, China
• HS Code: 2909609000
• Production Capacity: 10000 Kilogram/Kilograms Per Month

Product Description

Butanox® LPT-IN Methyl ethyl ketone peroxide in diisononyl phthalate

Product Description

 

ButanoxLPT-IN Storage

Due to the relatively unstable nature of organic peroxides a loss of quality can be detected over a period of time.

To minimize the loss of quality, Nouryon recommends a

maximum storage temperature (Ts max.) for each

organic peroxide product.

For Butanox LPT-IN

Ts  max. =25°C

 

NOTE:

When stored under these recommended storage conditions,Butanox LPT-IN will remain within the

Nouryon specifications for a period of at least 6 

months after delivery.

 

 

ButanoxLPT-IN Thermal stability

Organic peroxides are thermally unstable substances, which may undergo self-accelerating decomposition. The lowest temperature at which self-accelerating 
decomposition of a substance in the original packaging may  occur is the Self-Accelerating Decomposition 
Temperature (SADT). The SADT is determined on the 
basis of the Heat Accumulation Storage Test.

For Butanox LPT-IN                    SADT :60°C

The Heat Accumulation Storage Test is a recognized test method for the determination of the SADT of organic 
peroxides (see Recommendations on the Transport of 
Dangerous Goods,    Manual of Tests and Criteria - United Nations, New York and Geneva).

 

ButanoxLPT-IN Safety and handling
Keep containers tightly closed. Store and handle Butanox LPT-IN in a dry well-ventilated place away from sources of heat or ignition and direct sunlight. Never weigh out in the storage room.
Avoid contact with reducing agents (e.g. amines), acids, alkalis and heavy metal compounds (e.g. accelerators, driers and metal soaps).
Please refer to the Material Safety Data Sheet (MSDS) for further information on the safe storage, use and
handling of Butanox LPT-IN. This information should be 
thoroughly reviewed prior to acceptance of this product.

Major decomposition products

Carbon dioxide, water, acetic acid, formic acid,
propionic acid, methyl ethylketone. 

 

 

ButanoxLPT-IN Dosage	Depending on working conditions, the following peroxide and accelerator dosage levels are recommended:
	Butanox LPT-IN		1 - 4 phr
	Accelerator NL-49P		0.5 - 3 phr
	Inhibitor NLC-10		0 - 0.2 phr
	* phr = parts per hundred resin
Cure Characteristics at ambient temperatures	In a high reactive standard orthophthalic resin in combination with Accelerator NL-49P (= 1% cobalt) the following application characteristics were determined:
	Gel times at 20°C	2 phr Butanox LPT-IN + 1.0 phr Acc. NL-49P	20 minutes
		2 phr Butanox M-50 + 1.0 phr Acc. NL-49P	7 minutes
	Cure of 4 mm laminates at 20°C	4 mm laminates have been made with a 450 g/m2 glass chopped strand mat. The glass content in the laminates is 30% (w/w).
		The following parameters were determined:
		☆Time-temperature curve
		☆Speed of cure expressed as the time to achieve a Barcol hardness (934-1) of 0-5 and 25-30 respectively
		☆Residual styrene content after 24 h at 20°C and a subsequent postcure of 8 h at 80°C
			Gel time min.	Time to peak min.	Peak exotherm°C
		2 phr Butanox LPT-IN + 1.0 phr Acc. NL-49P	24	54	41
		2 phr Butanox M-50 + 1.0 phr Acc. NL-49P	8	26	64
			Barcol 0-5h	Barcol 25-30h	Res.styrene24h 20°C%	Res.styrene+8h 80°C%
		2 phr Butanox LPT-IN + 1.0 phr Acc. NL-49P	3	13	6	<0.1
		2 phr Butanox M-50 + 1.0 phr Acc. NL-49P		1	5	<0.1
Cure Characteristics at elevated temperatures	The fact that processing times of several hours can be achieved with low cobalt dosages and small amounts of an inhibitor makes Butanox LPT-IN very suitable for use in e.g. filament winding techniques. Simulating the manufacture of a pipe at 70°C consisting of a laminate of 4 mm with a glass content of 30% gave the following results:
	Butanox LPT-IN		1.5 phr
	Accelerator NL-49P		0.3 phr
	Inhibitor NLC-10		0.2 phr
	Gel time at 20°C:		200 minutes
	Curing data at 70°C:
	Curing data at 70°C:		7 minutes
	Time to Peak		17 minutes
	Peak exotherm		119°C
	Barcol hardness 10 minutes after reaching the peak:		44
	Pot life at 20°C	Pot lives were determined of a mixture of Butanox LPT-IN and a non preaccelerated UP resin at 20°C.
		2 phr Butanox LPT-IN	11 h
		4 phr Butanox LPT-IN	6 h

Packaging and transport

The standard packaging is a 30 l HDPE can (Nourytainer®) for 30 kg peroxide solution.
 

In Asia Pacific the standard packaging is a 30 l HDPE can for 20 kg peroxide solution.
 

Both packaging and transport meet the international regulations. For the availability of other packed

quantities contact your Nouryon representative.
 

Butanox LPT-IN is classified as Organic peroxide type D; liquid; Division 5.2; UN 3105; PG II.

 

 

Product Parameters

 

Product description	CAS No.	1338-23-4
	EINECS/ELINCS No.	215-661-2
	TSCA status	listed on inventory
Specifications	Appearance	Clear and colorless liquid
	Colors	Butanox LPT-IN is available in the color red
	Total active oxygen	8.4-8.6%
Characteristics	Density, 20°C	1.0117 g/cm3
	Viscosity, 20°C	32.4 mPa.s

Application

☆Butanox LPT-IN is a methyl ethyl ketone peroxide (MEKP) for the curing of unsaturated polyester resins in the presence of a cobalt accelerator at room and elevated temperatures. 

☆Butanox LPT-IN gives in comparison with most other ketone peroxides a significantly longer gel time and is therefore particularly suitable for those applications where a long gel time or production time is required, for instance in the production of large parts and in filament winding. 

☆Also in areas with high ambient temperatures Butanox LPT-IN is of particular interest. 

☆Butanox LPT-IN is especially recommended for the cure of vinyl ester resins. This MEKP formulation gives less "foaming" than standard MEKP's. 

☆Practical experience throughout many years has proven that by the guaranteed low water content and the absence of polar compounds, Butanox LPT-IN is very suitable in GRP products for e.g. marine applications. 

☆The low hydrogen peroxide content of Butanox LPT-IN makes this peroxide very suitable for the cure of those gelcoats, which tend to microporosity caused by the decomposition of the hydrogen peroxide. 

☆For room temperature application it is necessary to use Butanox LPT-IN together with a cobalt accelerator
(e.g. Accelerator NL-49P).

Our Advantages

Why Choose Us?

1.Provide Full Export Certificates Necessary For Export In Short Time, Delivery Time Fast .

2.No District Limit , Can Export Our Chemicals To Every Corner Of The World.

3.Corporate With World Famous Brand, Quality Assured, Cost Effective .

4.Professional And Strong Technical Support.

5.Full Line Nouryon Brand Peroxides

6.Hot Chemicals, Short Of Supply Chemicals, We Have .

7.Rich Export Experience In High Dangerous Goods , Like Chemicals Trigonox 301,Perkadox 16 Which Need Cool Container.

Production Process

Company Profile

Evergreen Chemicals Co., Ltd. is located in Wuxi on the shore of the Taihu Lake. It was established in 2019. After nearly five years of development and continuous innovation, we have became your one-stop shop for composite materials including unsaturated polyester resin, vinyl ester resin, epoxy resin, organic peroxide, glass fiber cloth, and related accessories. We stick to the business policy of "creating a brand with high quality, expanding the market with service, seeking development with innovation, and winning the reputation with integrity". We actively carry out domestic and foreign businesses, which are highly recognized by lots of clients. At the same time, we have a large number of high-tech R&D talents from famous college, a complete and scientific supply chain management and quality management system, high-end and advanced hardware equipment, which keeps us improving in the development process and making us occupy a leading position in the industry. The company insists the business philosophy of "customer first, forge ahead" to provide customers with the best quality services.

We also welcome O E M and O D M orders. You can talk to our customer service center about your sourcing requirements, We will provide you with the most professional service. Welcome final users and distributors from all the world contact with us and create success.

Certifications

FAQ

1. Q: Is your company a manufacturer?
     A: Yes,we are. At the same time, we are also agents of other product brands.

2. Q:  Does your company provide samples?
     A:  Yes,we  can provide 100g and 200g for additive and 500g/1kg for resin as free samples,  but freight usually requires the buyer to bear.

3. Q:What is your company's  transportation form?
     A: Samples generally deliver by international express, a large number of goods can be transported by land or water.

4: Q: What is the quality and price of your product?
     A: Specializing in epoxy resin and other unsaturated polyester resin .100% tested and working before shipment .best price will grant you as per your quantity .

5. Q: How many days the clear phenolic epoxy resin could sotre ?
    A: 12 months below 25ºC in dark.