| Customization: | Available |
|---|---|
| CAS No.: | 8052-41-3 |
| Formula: | Un-Available |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| SECTION I INGREDIENTS | |||
| PRODUCT | CAS NUMBER | TLV | PERCENTAGES |
| STODDARD SOLVENT (MINERAL SPIRITS) | 8052-41-3 | 500A 100B | 70-75% |
| NON HAZARDOUS INGREDIENTS: | - | - | - |
| POPRIETARY WAX BLEND | - | - | 25-30% |
| Section II EMERGENCY AND FIRST AID PROCEDURES | |||
| EYE CONTACT |
Gently flush with large quantities of water for at least 15 minutes. Seek medical attention immediately |
||
| SKIN CONTACT |
Remove any contaminated clothing. Wash with soap and large quantities of water. Seek medical attention if irritated. |
||
| INHALATION | If breathing difficulties, dizziness, or light-headedness occur when working in areas with high vapor concentration, move to outside air immediately. If breathing stops, begin artificial respiration and seek immediate medical attention. |
||
| INGESTION | If this product is swallowed, seek medical attention immediately. DO NOT induce vomiting unless directed by a physician. |
||
| Section III PHYSIOLOGICAL EFFECTS AND HEALTH INFORMATION | |||
| EYE EFFECTS |
This product may be an eye irritant. | ||
| SKIN EFFECTS |
Prolonged skin contact may result in irritation and/or Dermatitis. PROLONGED OR REPEATED SKIN CONTACT MAY RESULT IN DERMATITIS |
||
| SYSTEMIC EFFECTS |
Various studies have shown a possible association with exposure to this product and the following: RESPIRATORY TRAT IRRITATION ANETHESIA IN HIGH CONCENTRATIONS. |
||
| SECTION IV SPECIAL PROTECTION INFORMATION | ||
| RESPIRATORY PROTECTION (Specify Type) |
The use of respiratory protection depends on vapor concentration of the time-weighted TLV. Use a respirator/gas mask with appropriate cartridges and canister (NIOSH approved, if available), or supplied air equipment, depending on airborne concentration. |
|
| VENTILATION | If general mechanical ventilation proves inadequate to maintain safe vapor concentrations, supplemental local exhaust may be required. Other special precautions, such as respiratory protection, may be required if vapor concentrations cannot be reduced to below the TLV by ventilation. |
|
| EYE PROTECTION | Safety glasses and/or face shields are recommended. | |
| PROTECTIVE GLOVES | The use of heavy rubber gloves is advised to prevent skin irritation and absorption. | |
| OTHER PROTECTIVE EQUIPMENT |
Impermeable aprons, availability of eye washes and safety are recommended. | |
| SECTION V REACTIVITY DATA | ||
| STABILITY Conditions to avoid: |
Stable NONE |
|
| INCOMPATIBILITY (Materials to avoid) |
This product is incompatible with strong oxidizing agents, strong acids, or bases, and selected amines. | |
| HAZARDOUS DECOMPOSITION PRODUCTS |
Thermal decomposition in the presence of air may yield carbon monoxide and/or carbon dioxide. |
|
| HAZARDOUS POLYMERIZATION |
Will Not Occur | |
| SECTION VI STORAGE AND SPECIAL PRECAUTIONS | ||
| HANDLING AND STORING PRECAUTIONS |
Keep product containers cool, dry and away from sources of ignition. Use and store with adequate ventilation. |
|
| OTHER PRECAUTIONS | Personnel should avoid inhalation of vapors. Should contact be made, remove saturated clothing and flush with water. |
|
| SECTION VII FIRE AND EXPLOSION HAZARD DATA | ||
| DOT FLAMMABILITY CLASSIFICATION |
Flash Point: 104°F / 40° C | |
| EXTINGUISHING MEDIA |
Use Foam, CO2 or dry chemical fire fighting apparatus. | |
| UNUSUAL FIRE & EXPLOSION HAZARDS |
Keep work areas free of hot metal surfaces and other sources of ignition. | |
| HAZARDOUS POLYMERIZATION |
The use of self-contained breathing apparatus is recommended for fire fighters. Avoid spreading burning liquid with water. Contact Fire Dept. immediately. |
|
Why Choose Us?
1.Provide Full Export Certificates Necessary For Export In Short Time, Delivery Time Fast .
2.No District Limit , Can Export Our Chemicals To Every Corner Of The World.
3.Corporate With World Famous Brand, Quality Assured, Cost Effective .
4.Professional And Strong Technical Support.
5.Full Line Nouryon Brand Peroxides
6.Hot Chemicals, Short Of Supply Chemicals, We Have .
7.Rich Export Experience In High Dangerous Goods , Like Chemicals Trigonox 301,Perkadox 16 Which Need Cool Container.
Evergreen Chemicals is a leading manufacturer and supplier of chemical composite materials in China. We've been and kept leading roles in this industry for more than 20 years, serving 8000+ customers all over the world from more than 25 fields. Our company is located in Jiangyin, half an hour to Shanghai by train, enjoying convenient transportation access.
We are specialized in researching, producing and distributing resin materials and its auxiliaries with premium quality. Our main products are unsaturated polyester resin, epoxy resin, vinyl resin and organic peroxides. In addition to market our own products, we are also the distributor of some global brands like NUORYON, SWANCOR, AOC, INOES etc.
Besides, auxiliaries like curing agent, accelerator, and initiator are also available here to customers. Our products are widely used in the fields of automobiles, tent poles, cooling towers, pipes, FRP, artificial stones, handicrafts, and resin manhole covers.
1. Q: Is your company a manufacturer?
A: Yes,we are. At the same time, we are also agents of other product brands.
2. Q: Does your company provide samples?
A: Yes,we can provide 100g and 200g for additive and 500g/1kg for resin as free samples, but freight usually requires the buyer to bear.
3. Q:What is your company's transportation form?
A: Samples generally deliver by international express, a large number of goods can be transported by land or water.
4: Q: What is the quality and price of your product?
A: Specializing in epoxy resin and other unsaturated polyester resin .100% tested and working before shipment .best price will grant you as per your quantity .
5. Q: How many days the clear phenolic epoxy resin could sotre ?
A: 12 months below 25ºC in dark.
){kind=link}