M0811V2, Mold Release Paste Wax (25- 187D) : M0811 2.0 Chemical Excipients All Walks of Life

• Customization: Available
• CAS No.: 8002-74-2
• Appearance: Cream-Colored Solid Paste
• Model NO.: LB-1100-1870-6
• Usage: Oil Drilling Auxiliary Agent, Water Treatment Chemicals, Rubber Auxiliary Agents, Plastic Auxiliary Agents, Coating Auxiliary Agents, Textile Auxiliary Agents, Paper Chemicals, Surfactants, Leather Auxiliary Agents, Electronics Chemicals
• Color: Cream-Colored Solid Paste
• General Physical Form: Solid
• Specific Physical Form: Paste
• Odor, Color, Grade: Cream-Colored Solid Paste
• Boiling Point: >=386 ℉
• Flash Point: 306 ℉
• Viscosity: >=100 Centipoise
• Density: 0.85 G/Ml
• Specific Gravity: 0.85 [Ref Std: Water=1]
• Volatile Organic Compounds: 24.5 % Weight [Test Method: Calculated Per Carb]
• Transport Package: Tray
• Specification: Compliance with international regulations
• Trademark: Evergreen
• Origin: Jiangsu, China
• HS Code: 3404900000
• Production Capacity: 10 Tons/Month

Product Description

Demoulding wax M0811V2

Demoulding wax M0811V2 is a special wax mixture, mainly composed of high-quality Brazilian Carnauba wax. Specially

designed for the composite material industry to provide products with higher glossiness and maximum demolding times.

Widely used in fields such as yachts, fishing boats, automotive accessories, rail transit, and bathroom fixtures.

Composition/information on ingredients
Ingredient	C.A.S. No.	% by Wt
Petroleum Distillates	64742-47-8	15 -  40 Trade Secret *
Petroleum Distillates	64742- 14-9	10 -  30 Trade Secret *
Carnauba Wax	8015-86-9	7 -  13 Trade Secret *
Oxidized Polyethylene	68441- 17-8	7 -  13 Trade Secret *
Poly (Dimethylsiloxane)	63148-62-9	5 -  10 Trade Secret *
Paraffin Wax	8002-74-2	3 -  7 Trade Secret *
Petroleum Distillates	64742-48-9	1 -  5 Trade Secret *
Alpha-Pinene	127-91-3	< 1 Trade Secret *
Beta-Pinene	127-91-3	< 1 Trade Secret *
*The specific chemical identity and/or exact percentage (concentration) of this composition has been withheld as a trade secret.

 

Ingredient	C.A.S. No.	Agency	Limit type	Additional Comments
Alpha-Pinene	127-91-3	ACGIH	TWA:20 ppm	Dermal Sensitizer, A4: Not class. as human     carcin
Beta-Pinene	127-91-3	ACGIH	TWA:20 ppm	Dermal Sensitizer, A4: Not class. as human     carcin
JET FUELS (NON-AEROSOL), AS TOTAL HYDROCARBON  VAPOR	64742-47-8	ACGIH	TWA(as total hydrocarbon vapor, non-aerosol):200     mg/m3	A3: Confirmed animal carcin., SKIN
Kerosine (petroleum)	64742-47-8	ACGIH	TWA(as total hydrocarbon vapor, non-aerosol):200     mg/m3	A3: Confirmed animal carcin., SKIN
Petroleum Distillates	64742-47-8	CMRG	TWA:165 ppm
Naphtha	64742-48-9	OSHA	TWA:400 mg/m3(100 ppm)
Petroleum Distillates	64742-48-9	Manufacturer determined	TWA:100 ppm
Paraffin Wax	8002-74-2	ACGIH	TWA(as fume):2 mg/m3

 

Application

1.Before using M0811V2 super demolding wax, the surface of the mold must be clean and clean. For old molds, they must
undergo grinding, polishing, and sealing before use. 2. Use a sponge to evenly apply an appropriate amount of M0811V2 super demoulding wax on the surface of the clean mold
in Circular motion until the entire mold surface is covered. 3. After operation, wait for 10 minutes for it to dry and solidify. 4. After drying, wipe the surface of the mold with a pure cotton cloth until the surface is bright and free of excess wax. 5. Using the same operation, complete at least 5 times and cure the last time for at least 30 minutes. 6. Then start production until difficulty occurs in demolding and reapply wax 1-3 times.