Atlac430 Vinyl Resin Feature High Mechanicalstrength and Exhibit Great Resistance to Chemicals and Heat Make Carbon and with Glass Fiber

• CAS No.: 100-42-5
• EINECS: 202-851-5
• Molecular Principal Chain: Carbon Chain Polymer
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: Atlac430
• Authentication 1: CCS
• Authentication 2: Lr
• Authentication 3: ISO
• Flash Point: 33°c
• Tensile Strength: 86MPa
• Tensile Modulus: 3, 2gpa
• Bending Strength: 150MPa
• Flexural Modulus: 3, 3gpa
• Transport Package: Tray
• Specification: Styrene solution
• Trademark: Evergreen
• Origin: Jiangsu, China
• HS Code: 3905910000
• Production Capacity: 100 Tons/Month
• Package Size: 88.00cm * 58.00cm * 88.00cm
• Package Gross Weight: 240.000kg

Product Description

Atlac ® 430 ACT Vinyl ester  resin

Product Description

Product description
1.Standard oxirene ester resin for hand lay up spray process.
2.It has excellent impermeability and long-term heat resistance, suitable for the production of anti-seepage layers and temperature resistant molds for ships and boats.
Characteristic performance
1.Excellent chemical corrosion resistance and water resistance
2.Excellent mechanical performance
3.Heat resistance
4.High dynamic load bearing capacity
5.CCS/LR certification
Product attributes
Atlac ® 430 ACT is a styrene solution of pre promoted thixotropic epoxy bisphenol A vinyl resin with moderate reactivity and viscosity.

Typical Applications
Atlac® 430 can be used in all fabrication methods, but is
especially adapted to meet the requirements of filament 
winding, centrifugal casting, hand lay-up and spray-up 
applications.
The resin provides resistance to a wide range of acids, alkali, 
and bleaches for the use in corrosive environments in the
chemical processing industry. The favorable combination of 
thermal resistance and elongation makes this resin suitable for
applications exposed to intermittent temperatures.
Certifications and Approva
Cured non-reinforced Atlac
® 430 conforms to type 1310 
according to DIN 16946/2 and is classified group 5 according 
to DIN 18820/1. According to EN13121/1 Atlac
® 430 is
classified group 7A.
WRAS approval of Atlac® 430 according to BS 6920: 2000 
Suitability of non-metallic products for use in contact with 
water intended for human consumption with regard to their 
effect on the quality of the water.
Atlac® 430 resin meets China's Hygienic Standards for Uses 
of Additives in Food Containers and Packaging Materials (GB 
4806-2016 and GB 9685-2016).
The resin is certified by Lloyd's Register and China 
Classification Society as gelcoat base resin and laminating
resin for use in Marine applications.

ISO 9001:2015 certification
The quality management system of each AOC manufacturing factory has been certified to the ISO 9001:2015 standard. This certification confirms that each AOC equipment follows the same internationally recognized management and quality assurance model. We operate in this mode to add value to the resins produced by our customers.

Process Operation Guidelines
A. Recommend using MEKP curing system with a dosage of 1%~2.5%; Depending on the construction temperature
Adjust the amount of curing agent. If the process requires a longer gel time (>60min), tert butyl catechol inhibitor can be added in the MEKP system. The workshop temperature should be maintained between 18 ºC and 32 ºC, and the workshop humidity should be maintained between 40% and 90%. Constant workshop conditions will obtain constant gel time and help manufacturers produce high-quality products.
B. During the curing process, it is recommended to add 0.2% wax with a melting point of 54-57 ° C to the surface of the product. When added, a 10% styrene solution is prepared. The final product with good curing will not stick to the surface.
C. Thixotropic resin, it is recommended to perform appropriate barrel rolling and gentle stirring before use to make the product uniform and conducive to operation.
Application Operation Guide
Room temperature cured products also need to undergo post curing treatment to achieve optimal physical and chemical properties. Prior to this, the product needs to undergo 24 hours of room temperature curing. The post curing conditions are: 80-100oC/3-6 hours (thick products take longer); For components used for chemical corrosion resistance, post curing is particularly important.

Product Parameters

Typical performance of liquid resin
Performance	numerical value	Unit	test method
flash point	33	°C	TM 2800
Stability, no initiator, dark, 25 °C	6	month	-
Typical performance of pure resin casting body
tensile strength	86	MPa	ISO 527-2
Tensile modulus	3,6	GPa	ISO 527-2
Tensile fracture elongation	6,1	%	ISO 527-2
bending strength	150	MPa	ISO 178
Flexural modulus	3,4	GPa	ISO 178
Hot deformation temperature HDT	105	°C	ISO 75 Ae
Glass transition temperature Tg	130	°C	ASTM D570
Notched impact strength	28	kJ/m2	ISO 179
Note: The curing system is to add 2.0 g of curing agent Butanox M50 to 100 g of resin. Curing at room temperature for 24 hours, curing at 100 ºC for 3 hours.
Index
appearance	muddy	-	TM 2265
Solid content, infrared drying	59-65	%	TM 2033
Acid value	3--8	mgKOH	/g
TM 2401	Viscosity@23ºC	400-500 mPa.s	TM 2013
Gel time (25ºC-35°C)	10-17	minute	TM 2625
Note: Reactivity test: Add 2.0g of curing agent Butanox separately ® Add 100 g of resin.

Application

 

Our Advantages

Why Choose Us?

1.Provide Full Export Certificates Necessary For Export In Short Time, Delivery Time Fast .

2.No District Limit , Can Export Our Chemicals To Every Corner Of The World.

3.Corporate With World Famous Brand, Quality Assured, Cost Effective .

4.Professional And Strong Technical Support.

5.Full Line Nouryon Brand Peroxides

6.Hot Chemicals, Short Of Supply Chemicals, We Have .

7.Rich Export Experience In High Dangerous Goods , Like Chemicals Trigonox 301,Perkadox 16 Which Need Cool Container.

 

Production Process

Company Profile

Evergreen Chemicals is a leading manufacturer and supplier of chemical composite materials in China. We've been and kept leading roles in this industry for more than 20 years, serving 8000+ customers all over the world from more than 25 fields. Our company is located in Jiangyin, half an hour to Shanghai by train, enjoying convenient transportation access.

We are specialized in researching, producing and distributing resin materials and its auxiliaries with premium quality. Our main products are unsaturated polyester resin, epoxy resin, vinyl resin and organic peroxides. In addition to market our own products, we are also the distributor of some global brands like NUORYON, SWANCOR, AOC, INOES etc.  

Besides, auxiliaries like curing agent, accelerator, and initiator are also available here to customers. Our products are widely used in the fields of automobiles, tent poles, cooling towers, pipes, FRP, artificial stones, handicrafts, and resin manhole covers.

 

Certifications

FAQ