411-350ashland Liquid Epoxy Vinyl Ester Resin Based on Bisphenol-a Epoxy Resin in Chemical Processing Pulp Paper Operations

• Molecular Principal Chain: Carbon Chain Polymer
• Appearance: Liquid
• Physical State: Liquid
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: 411-350
• Colour: Light Yellow
• Odour: Light Yellow
• Evaporation Rate: < 1 Ethyl Ether = 1
• Flammability (Liquids): Static Accumulating Liquid
• Relative Vapour Density: > 1(Air = 1.0)
• Transport Package: Tray
• Trademark: Evergreen
• Origin: Jiangsu, China
• HS Code: 3905990000
• Production Capacity: 100 Tons/Month
• Package Size: 88.00cm * 58.00cm * 88.00cm
• Package Gross Weight: 220.000kg

Product Description

Ashland  411-350 Epoxy Vinyl Ester Resin

Product Description

 

DERAKANE 411-350 Product description

DERAKANE 411-350 epoxy vinyl ester resin is based on bisphenol-A epoxy resin and has become the "industry standard" due to its wide range of end-use applications and ability to be used in a wide range of fabrication techniques. The raw materials used in the manufacture

of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420 for repeated use in contact with food, subject to user's compliance with the prescribed limitations of that regulation.

 

Equipment fabricated with DERAKANE 411-350 resin has superior elongation and toughness and better impact resistance and less cracking due to cyclic temperature,pressure flutuations and mechanical shocks providing a safety factor against damage during

process upsets or during shipping installation.Composites fabricated with DERAKANE 411-350 resin provide resistance to a wide range of acids,alkalis, bleaches and solvents. This resin holds up well in corrosive invironments, postponing the need for replacements. Equipment fabricated with DERAKANE 411-350 resin tolerates heavy design loads without causing failure due to resin damage. This facilitates working with large weight-bearing equipment with confidence.

 

DERAKANE 411-350 APPLICATIONS AND USE

-DERAKANE 411-350 resin is designed for use in fabricating FRP storage tanks, vessels, ducts and

on-site maintenance projects, paticularly in chemical processing and pulp and paper operations.

- The resin is designed for ease of fabrication using hand lay-up, spray-up, filament winding, compression

molding and resin transfer molding techniques, pultrusion and molded grating applications.

- An alternate viscosity, optimized for some vacuum infusion processes is available as DERAKANE

MOMENTUM 411-200 resin.

- An alternate for low styrene content (HAP) is available as DERAKANE 441-400 resin.

TYPICAL LIQUID RESIN PROPERTIES

Property(1) at 25°C (77°F)	Value	Unit
Dynamic Viscosity	370	mPas (cps)
Kinematic Viscosity	350	cSt
Styrene Content	45	%
Density	1.046	g/ml

 

DERAKANE 411-350 CERTIFICATES AND APPROVALS

The manufacturing, quality control and distribution of products, by Ashland Performance Materials,comply with one or more of the following programs or standards: Responsible Care, ISO 9001,ISO 14001 and OHSAS 18001.
 

DERAKANE 411-350 HANDLING AND STORAGE

Standard Package: 55-Gallon (208 liter) Drum, Non-Returnable, Net Wt. 205 kgs (452 Lbs.)

Dot Label Required: Flammable Liquid Drums - It is highly recommended that all material is stored at stable temperatures below 25°C (77 °F).

Avoid exposure to heat sources such as direct sunlight or steam pipes. To avoid contamination of product with water, do not store outdoors. Keep sealed to prevent moisture pick-up and monomer loss. Rotate stock.

Bulk - See Ashland's Bulk Storage and Handling Manual for Polyesters and Vinyl Esters. A copy of this may be obtained from Ashland at +1.614.790.3333 or 800.523.6963.When stored in accordance with the above conditions, Ashland warrants this product to remain within 
specifications for six (6) months from date of manufacture. All things being equal, higher storage temperature will reduce product stability and lower storage temperature will extend product stability.

 

 

 

 

Product Parameters

DERAKANE 411-350 Notice

All information presented herein is believed to be accurate and reliable, and is solely for the user's consideration, investigation and verification. The information is not to be taken as an express or implied representation or warranty for which Ashland assumes legal responsibility. Any warranties, including warranties of merchantability, fitness for use or non-infringement of intellectual property rights of third

parties, are herewith expressly excluded.

MEKP Cure System
Typical geltimes(2) using NOROX(3) (ME)KP-925H(4) catalyst (MEKP) and Cobalt Naphthenate-6%(5)(Co-nap6%), Dimethylaniline (DMA) and 2,4-Pentanedione (2,4-P).
Geltime at 15 °C (59 °F)	MEKP(phr)(6)	Co-nap6%(phr)	DMA(phr)	2,4-P(phr)
15 +/- 5 minutes	1.5	0.3	0.2	-
30 +/- 10 minutes	1.5	0.3	0.05	-
60 +/- 15 minutes	1.25	0.3	0.05	0.04
Geltime at 20°C (68°F)	MEKP(phr)	Co-nap6% (phr) DMA	DMA(phr)	2,4-P(phr)
15 +/- 5 minutes	1.5	0.3	0.1	-
30 +/- 10 minutes	1.5	0.3	0.05	0.03
60 +/- 15 minutes	1.5	0.3	0.05	0.06
Geltime at 25°C (77°F)	MEKP(phr)	Co-nap6% (phr) DMA	DMA(phr)	2,4-P(phr)
15 +/- 5 minutes	1.25	0.2	0.05	-
30 +/- 10 minutes	1.25	0.2	-	0.02
60 +/- 15 minutes	1.5	0.2	-	0.05
Geltime at 30°C (86°F)	MEKP(phr)	Co-nap6% (phr) DMA	DMA(phr)	2,4-P(phr)
15 +/- 5 minutes	1	0.2	0.02	-
30 +/- 10 minutes	1.25	0.2	-	0.04
60 +/- 15 minutes	1.25	0.2	-	0.06
Geltime at 35°C (95°F)	MEKP(phr)	Co-nap6% (phr) DMA	DMA(phr)	2,4-P(phr)
15 +/- 5 minutes	1	0.2	-	0.02
30 +/- 10 minutes	1	0.2	-	0.05
60 +/- 15 minutes	1	0.2	-	0.08
Property	Value (SI)	Method	Value (US)	Method
Tensile Strength	86 MPa	ISO 527	12000 psi	ASTM D638
Tensile Modulus	3200 MPa	ISO 527	460 kpsi	ASTM D638
Tensile Elongation at Yield	5-6%	ISO 527	5-6%	ASTM D638
Flexural Strength	150 MPa	ISO 178	22000 psi	ASTM D790
Flexural Modulus	3400 MPa	ISO 178	490 kpsi	ASTM D790
Heat Distortion Temperature(8)	105 °C	ISO 75	220 °F	ASTM D648
Glass Transition Temperature, Tg2	120 °C	ISO 11359-2	250 °F	ASTMD3419
Volume Shrinkage	7.80%	-	7.80%	-
Barcol Hardness	35	EN 59	35	ASTM D2583
Density	1.14 g/cm3	ISO 1183	-	ASTM D792
Tensile Strength	150 MPa	ISO 527	22000 psi	ASTMD3039
Tensile Modulus	12000 MPa	ISO 527	1700 kpsi	ASTMD3039
Flexural Strength	210 MPa	ISO 178	30000 psi	ASTM D790
Flexural Modulus	8100 MPa	ISO 178	1200 kpsi	ASTM D790
Glass Content	40%	ISO 1172	40%	ASTMD2584
Use of cobalt octoate, especially in combination with 2,4-P can result in 20-30% slower geltimes. phr = parts per hundred resin molding compound. Cure schedule: 24 hours at room temperature and 2 hours at 120°C (250 °F). Maximum stress: 1.8 MPa (264 psi). Cure schedule: 24 hours at room temperature and 6 hours at 80 °C (175 °F). Laminate construction of 6mm (1/4")is V/M/M/Wr/M/Wr/M where V=Continuous veil glass,M=Chopped strand mat 450 g/m2(1.5 oz/ft2) and Wr=Wowen roving 800 g/m2(24 oz/yd2).

 

Application

 

Our Advantages

Why Choose Us?

1.Provide Full Export Certificates Necessary For Export In Short Time, Delivery Time Fast .

2.No District Limit , Can Export Our Chemicals To Every Corner Of The World.

3.Corporate With World Famous Brand, Quality Assured, Cost Effective .

4.Professional And Strong Technical Support.

5.Full Line Nouryon Brand Peroxides

6.Hot Chemicals, Short Of Supply Chemicals, We Have .

7.Rich Export Experience In High Dangerous Goods , Like Chemicals Trigonox 301,Perkadox 16 Which Need Cool Container.

Production Process

 

Company Profile

Evergreen Chemicals is a leading manufacturer and supplier of chemical composite materials in China. We've been and kept leading roles in this industry for more than 20 years, serving 8000+ customers all over the world from more than 25 fields. Our company is located in Jiangyin, half an hour to Shanghai by train, enjoying convenient transportation access.

We are specialized in researching, producing and distributing resin materials and its auxiliaries with premium quality. Our main products are unsaturated polyester resin, epoxy resin, vinyl resin and organic peroxides. In addition to market our own products, we are also the distributor of some global brands like NUORYON, SWANCOR, AOC, INOES etc.  

Besides, auxiliaries like curing agent, accelerator, and initiator are also available here to customers. Our products are widely used in the fields of automobiles, tent poles, cooling towers, pipes, FRP, artificial stones, handicrafts, and resin manhole covers.

 

Certifications

FAQ