Basic Info.
Molecular Principal Chain
Carbon Chain Polymer
Evaporation Rate
< 1 Ethyl Ether = 1
Flammability (Liquids)
Static Accumulating Liquid
Relative Vapour Density
> 1(Air = 1.0)
Product Description
Derakane Momentum™ 411-350 Epoxy Vinyl Ester Resin
Product Description
Product descriptionDERAKANE 411-350 epoxy vinyl ester resin is based on bisphenol-A epoxy resin and has become the "industry standard" due to its wide range of end-use applications and ability to be used in a wide range of fabrication techniques. The raw materials used in the manufacture of this resin are listed as acceptable in FDA regulation Title 21 CFR 177.2420 for repeated use in contact with food, subject to user's compliance with the prescribed limitations of that regulation. Equipment fabricated with DERAKANE 411-350 resin has superior elongation and toughness and better impact resistance and less cracking due to cyclic temperature, pressure flutuations and mechanical shocks providing a safety factor against damage during process upsets or during shipping installation. Composites fabricated with DERAKANE 411-350 resin provide resistance to a wide range of acids, alkalis, bleaches and solvents. This resin holds up well in corrosive invironments, postponing the need for replacements. Equipment fabricated with DERAKANE 411-350 resin tolerates heavy design loads without causing failure due to resin damage. This facilitates working with large weight-bearing equipment with confidence.
APPLICATIONS AND USE -DERAKANE 411-350 resin is designed for use in fabricating FRP storage tanks, vessels, ducts and on-site maintenance projects, paticularly in chemical processing and pulp and paper operations.
- The resin is designed for ease of fabrication using hand lay-up, spray-up, filament winding, compression molding and resin transfer molding techniques, pultrusion and molded grating applications.
- An alternate viscosity, optimized for some vacuum infusion processes is available as DERAKANE MOMENTUM 411-200 resin.
- An alternate for low styrene content (HAP) is available as DERAKANE 441-400 resin.
- Recommendations for specific services and environments can be provided by contacting us at derakane@ashland.com.
TYPICAL LIQUID RESIN PROPERTIESProperty(1) at 25°C (77°F) | Value | Unit |
Dynamic Viscosity | 370 | mPas (cps) |
Kinematic Viscosity | 350 | cSt |
Styrene Content | 45 | % |
Density | 1.046 | g/ml |
CERTIFICATES AND APPROVALSThe manufacturing, quality control and distribution of products, by Ashland Performance Materials,comply with one or more of the following programs or standards: Responsible Care, ISO 9001,ISO 14001 and OHSAS 18001. HANDLING AND STORAGE Standard Package: 55-Gallon (208 liter) Drum, Non-Returnable, Net Wt. 205 kgs (452 Lbs.)
Dot Label Required: Flammable Liquid Drums - It is highly recommended that all material is stored at stable temperatures below 25°C (77 °F).
Avoid exposure to heat sources such as direct sunlight or steam pipes. To avoid contamination of product with water, do not store outdoors. Keep sealed to prevent moisture pick-up and monomer loss. Rotate stock.
Bulk - See Ashland's Bulk Storage and Handling Manual for Polyesters and Vinyl Esters. A copy of this may be obtained from Ashland at +1.614.790.3333 or 800.523.6963.When stored in accordance with the above conditions, Ashland warrants this product to remain within
specifications for six (6) months from date of manufacture. All things being equal, higher storage temperature will reduce product stability and lower storage temperature will extend product stability.
Product Parameters
All information presented herein is believed to be accurate and reliable, and is solely for the user's consideration, investigation and verification. The information is not to be taken as an express or implied representation or warranty for which Ashland assumes legal responsibility. Any warranties, including warranties of merchantability, fitness for use or non-infringement of intellectual property rights of third parties, are herewith expressly excluded.
MEKP Cure System |
Typical geltimes(2) using NOROX(3) (ME)KP-925H(4) catalyst (MEKP) and Cobalt Naphthenate-6%(5)(Co-nap6%), Dimethylaniline (DMA) and 2,4-Pentanedione (2,4-P). |
Geltime at 15 °C (59 °F) | MEKP(phr)(6) | Co-nap6%(phr) | DMA(phr) | 2,4-P(phr) |
15 +/- 5 minutes | 1.5 | 0.3 | 0.2 | - |
30 +/- 10 minutes | 1.5 | 0.3 | 0.05 | - |
60 +/- 15 minutes | 1.25 | 0.3 | 0.05 | 0.04 |
Geltime at 20°C (68°F) | MEKP(phr) | Co-nap6% (phr) DMA | DMA(phr) | 2,4-P(phr) |
15 +/- 5 minutes | 1.5 | 0.3 | 0.1 | - |
30 +/- 10 minutes | 1.5 | 0.3 | 0.05 | 0.03 |
60 +/- 15 minutes | 1.5 | 0.3 | 0.05 | 0.06 |
Geltime at 25°C (77°F) | MEKP(phr) | Co-nap6% (phr) DMA | DMA(phr) | 2,4-P(phr) |
15 +/- 5 minutes | 1.25 | 0.2 | 0.05 | - |
30 +/- 10 minutes | 1.25 | 0.2 | - | 0.02 |
60 +/- 15 minutes | 1.5 | 0.2 | - | 0.05 |
Geltime at 30°C (86°F) | MEKP(phr) | Co-nap6% (phr) DMA | DMA(phr) | 2,4-P(phr) |
15 +/- 5 minutes | 1 | 0.2 | 0.02 | - |
30 +/- 10 minutes | 1.25 | 0.2 | - | 0.04 |
60 +/- 15 minutes | 1.25 | 0.2 | - | 0.06 |
Geltime at 35°C (95°F) | MEKP(phr) | Co-nap6% (phr) DMA | DMA(phr) | 2,4-P(phr) |
15 +/- 5 minutes | 1 | 0.2 | - | 0.02 |
30 +/- 10 minutes | 1 | 0.2 | - | 0.05 |
60 +/- 15 minutes | 1 | 0.2 | - | 0.08 |
Property | Value (SI) | Method | Value (US) | Method |
Tensile Strength | 86 MPa | ISO 527 | 12000 psi | ASTM D638 |
Tensile Modulus | 3200 MPa | ISO 527 | 460 kpsi | ASTM D638 |
Tensile Elongation at Yield | 5-6% | ISO 527 | 5-6% | ASTM D638 |
Flexural Strength | 150 MPa | ISO 178 | 22000 psi | ASTM D790 |
Flexural Modulus | 3400 MPa | ISO 178 | 490 kpsi | ASTM D790 |
Heat Distortion Temperature(8) | 105 °C | ISO 75 | 220 °F | ASTM D648 |
Glass Transition Temperature, Tg2 | 120 °C | ISO 11359-2 | 250 °F | ASTMD3419 |
Volume Shrinkage | 7.80% | - | 7.80% | - |
Barcol Hardness | 35 | EN 59 | 35 | ASTM D2583 |
Density | 1.14 g/cm3 | ISO 1183 | - | ASTM D792 |
Tensile Strength | 150 MPa | ISO 527 | 22000 psi | ASTMD3039 |
Tensile Modulus | 12000 MPa | ISO 527 | 1700 kpsi | ASTMD3039 |
Flexural Strength | 210 MPa | ISO 178 | 30000 psi | ASTM D790 |
Flexural Modulus | 8100 MPa | ISO 178 | 1200 kpsi | ASTM D790 |
Glass Content | 40% | ISO 1172 | 40% | ASTMD2584 |
Use of cobalt octoate, especially in combination with 2,4-P can result in 20-30% slower geltimes. phr = parts per hundred resin molding compound. Cure schedule: 24 hours at room temperature and 2 hours at 120°C (250 °F). Maximum stress: 1.8 MPa (264 psi). Cure schedule: 24 hours at room temperature and 6 hours at 80 °C (175 °F). Laminate construction of 6mm (1/4")is V/M/M/Wr/M/Wr/M where V=Continuous veil glass,M=Chopped strand mat 450 g/m2(1.5 oz/ft2) and Wr=Wowen roving 800 g/m2(24 oz/yd2). |
Application
Our Advantages
1.Provide Full Export Certificates Necessary For Export In Short Time, Delivery Time Fast .
2.No District Limit , Can Export Our Chemicals To Every Corner Of The World.
3.Corporate With World Famous Brand, Quality Assured, Cost Effective .
4.Professional And Strong Technical Support.
5.Full Line Nouryon Brand Peroxides
6.Hot Chemicals, Short Of Supply Chemicals, We Have .
7.Rich Export Experience In High Dangerous Goods , Like Chemicals Trigonox 301,Perkadox 16 Which Need Cool Container.
Production Process
Company Profile
Evergreen Chemicals is a leading manufacturer and supplier of chemical composite materials in China. We've been and kept leading roles in this industry for more than 20 years, serving 8000+ customers all over the world from more than 25 fields. Our company is located in Jiangyin, half an hour to Shanghai by train, enjoying convenient transportation access.
We are specialized in researching, producing and distributing resin materials and its auxiliaries with premium quality. Our main products are unsaturated polyester resin, epoxy resin, vinyl resin and organic peroxides. In addition to market our own products, we are also the distributor of some global brands like NUORYON, SWANCOR, AOC, INOES etc.
Besides, auxiliaries like curing agent, accelerator, and initiator are also available here to customers. Our products are widely used in the fields of automobiles, tent poles, cooling towers, pipes, FRP, artificial stones, handicrafts, and resin manhole covers.
Certifications
FAQ
Address:
Room 807, Building 5, 1590 Longjin Road, Changzhou, Jiangsu, China
Business Type:
Manufacturer/Factory
Business Range:
Chemicals
Company Introduction:
Since its foundation in 2013, Evergreen Chemicals has established itself as the one-stop solution provider of the composite materials in the national and international market. Evergreen Chemicals keeps developing relationships with top manufacturers and raw materials suppliers around the world.
We are very popular with our customers not only because of our fast delivery time( we promise fastest delivery time than any other factory), most professional &efficiency danger-ous goods export team, most powerful custom clearance capability( can export to every corner of the world), but also because we are world famous brand partner like NOURYON(AKZONOBEL), INOES(ASHLAND), AOC(DSM), SWANCOR, NANYA, HUNTSMAN, CHEMTREND, JUSHI, EVONIK, , BYK, HANKEL, TOSOH, UNITED INITIATORS.
Lt owns scientifc and complete management system to assure the high quality products and o-time delivery rate. Evergreen always focus on clients and delivery performance. We are able to react quickly, competently and efficiently to the individual wishes and requirements of our customers.